Crestron TSW-752 Manuale Utente Scaricare il pdf

quickstart guide

TSW-752

www.crestron.com

888.273.7876 201.767.3400

Specifications subject to

change without notice.

TSW-752

7” Touch Screen

The Crestron

TSW-752 touch screen installs into a standard 2-gang or 3-gang U.S. electrical box or a

2-gang European electrical box. It can also be attached directly to drywall and other surfaces over the

front of a 2 3/8” (60 mm) high by 3 3/8” (86 mm) wide cutout. When installed, the touch screen protrudes

just 1/2” (13 mm) from the mounting surface and magnetically adheres to its included mounting bracket.

Screws are supplied for installation.

Install the Touch Screen

QUICKSTART DOC. 7574B (2040590, Sheet 1 of 2) 08.14

To mount the TSW-752 into an electrical box, use the following procedure:

1. Use four of the eight included screws (four #06-32 x 3/4” or four 3 x 16 mm screws) to attach the

mounting bracket (4516761) to the electrical box, as shown in the following illustrations.

For U.S.-style installations, use the #06-32 x 3/4” screws (2033247).

For European-style installations, use the 3 x 16 mm screws (2013788).

Mount the TSW-752 into a U.S. Electrical Box

2. When making connections to the TSW-752, use Crestron power supplies for Crestron equipment.

Apply power after all connections have been made.

3. Carefully position the touch screen over the mounting bracket and gently place it in position.

The magnets on the rear of the touch screen hold it in place on the mounting bracket.

LAN PoE Connection and Reset Button for the TSW-752

Mount the TSW-752 into a European Electrical Box

NOTE: The included cable mount ferrite bead, FBTH-2

(2033216), should be placed on the LAN cable in the

electrical box.

For regulatory compliance information, refer to Doc. 7575.

NOTE: For U.S.-style installations, use a #2 Phillips screwdriver. For European-style installations,

use a #1 Phillips screwdriver or equivalent.

TSW-752

U.S. Electrical Box

Mounting Bracket

(4516761 )

Screws (4) #06-32 x 3/4”

(2033247)

Screws (4) 3 x 16 mm

(2013788)

TSW-752

European Electrical Box

Mounting Bracket

(4516761 )

NOTE: For proper positioning of the touch screen unit, the electrical box or cutout must be positioned

approximately 1/4” (6 mm) to the right of center and 1/10” (3 mm) above center.

Reset Button

LAN PoE:

10BASE-T/100BASE-TX

Ethernet to LAN

1 2 3 4

7” Touch Screen 1

Sommario

Pagina 1 - 7” Touch Screen

quickstart guide TSW-752www.crestron.com888.273.7876 201.767.3400Specifications subject to change without notice.TSW-7527” Touch ScreenThe Crestron® T

Pagina 2

quickstart guide TSW-752www.crestron.com888.273.7876 201.767.3400Specifications subject to change without notice.TSW-7527” Touch ScreenQUICKSTART DOC.

Pagina 3

quickstart guide TSW-752www.crestron.com888.273.7876 201.767.3400Specifications subject to change without notice.TSW-7527” Touch ScreenQUICKSTART DOC.

Pagina 4

quickstart guide TSW-752www.crestron.com888.273.7876 201.767.3400Specifications subject to change without notice.TSW-7527” Touch ScreenAudio Features