Crestron C2N-DB6 Manuale Utente Scaricare il pdf (Pagina 16)

Demonstration Case Crestron C2N-DEMO Interface Case

Button 7 (SRC)

This button cycles through the various virtual audio sources. The feedback LED

illuminates only while the button is pressed. Audio WAV files are triggered with the

selection of each new source. This demonstrates how even a simple interface such a

keypad can give detailed feedback information.

Button 8 (VOL -)

This button decreases the volume level of the virtual audio system. The feedback

LED illuminates only while the button is pressed.

C2N-DB12

1.532

MP3

1.788

1.067

1.696

4.158

VOL -

OFFCD

2.696

VOL +

PATH LOWER

LAMP RAISE

DOWN FAN

This interface was programmed as the primary control point for the entry. The entire

virtual house can be monitored from the web page project associated with this

system.

Button 1 (DOWN)

This button toggles the down lights off and on with a two second fade time. The

feedback LED illuminates anytime the light level is greater than 0%.

Button 2 (FAN)

This button turns on the fan and selects various speeds. The first press sets the fan to

speed 4, the second press to speed 3, then to speed 2, speed 1, and finally back to the

off state. The feedback LED illuminates whenever the fan is on.

Button 3 (LAMP)

This button toggles the lamp off and on with a two second fade time. The feedback

LED illuminates anytime the light level is greater than 0%.

Button 4 (RAISE)

This button ramps up the light level of the last fixture selected from this keypad

(Down / Lamp). This process takes five seconds from a level of 0% to reach 100%.

12 • Crestron Demonstration Case: C2N-DEMO Interface Case Reference Guide – DOC. 6281

1 2 ... 11 12 13 14 15 16 17 18 19 20

Nessun commento

Crestron C2N-DB6 Manuale Utente Pagina 16